Pro-Audio

The TGI Microphone Clip (Regular Style) is a standard open-cup mic clip made from high-quality plastic. It holds microphones with a 28mm diameter, ...

The TGI Microphone Clip (Clamp Style) is a clamp-type mic holder made from a high-quality, flexible plastic. Its jaws close around the body of the ...

The Neutrik NE8FF is an etherCON RJ45 feedthrough coupler for extending network cables. Both ends are female etherCON receptacles, so it joins two ...

The Neutrik NA2FP is a pre-wired adaptor from a 3-pole female XLR to a mono 1/4-inch (6.35mm) jack plug. It lets a male XLR, such as the end of a m...

The Neutrik NA2MP joins a 3-pole male XLR and a mono 1/4-inch (6.35mm) jack plug in one pre-wired diecast body. Push the jack into a 1/4-inch outpu...

This Kirlin adaptor is a 3.5mm to 1/4-inch headphone adaptor, with a 3.5mm stereo (TRS) socket on one end and a 1/4-inch (6.35mm) stereo (TRS) jack...

The Pro-Signal male XLR to phono adaptor converts a male XLR to phono (RCA). As pictured, it has a latching female XLR socket at one end, which tak...

The Pro-Signal female XLR to phono adaptor converts a female XLR to phono (RCA). As pictured, it has a male XLR connector at one end, which takes t...

The LP Claw Gooseneck Microphone Clamp (LP591A), which LP calls the EZ-Mount Mic Claw, clamps a microphone straight onto a drum rim. It gives you c...

The LP Claw Microphone Clamp (LP592A-X), listed by LP as the Claw with Mic Mount, clamps to a drum rim and holds the microphone on a rigid 3/8in Z-...

The Gibraltar SC-BDHMM is a bass drum hoop mic mount: a rubber-lined clamp that fixes to the front hoop of the kick drum, with a gooseneck and a 5/...

This XLR to 3.5mm cable splits a 3.5mm stereo jack into two male XLRs, so you can plug a phone, laptop or tablet into two inputs on a mixing consol...

The Pro-Signal PSG3198 is a 1m phono to phono pair: a slimline twin RCA lead with two phono plugs at each end, colour coded for left and right. It ...

The Pulse Black Microphone Windshield is a foam cover that slides over the grille of a handheld vocal mic. Pulse makes its foam windshields to help...

The Pulse stereo jack to 2 x mono jack sockets lead is a splitter with a 1/4" stereo jack plug at one end and two 1/4" mono jack sockets at the oth...

The Rocoren braided 3.5mm aux cable is a 1m male to male stereo lead with a 3.5mm jack plug at each end. It connects phones, laptops, tablets and o...

Van Damme XLR cables made from Van Damme Tour Grade Classic XKE microphone cable with Neutrik XLRs: a female NC3FXX at one end and a male NC3MXX at...

The Pro-Signal 3.5mm headphone extension is a 1.5m 3.5mm jack extension cable with a 3.5mm stereo plug at one end and a 3.5mm stereo socket at the ...

The sE Electronics V7 MC2 Black is the wireless version of sE's V7 supercardioid dynamic vocal mic, made for Sennheiser handheld transmitters in pl...

The sE Electronics V7 MC1 Black puts the sound of sE's V7 supercardioid dynamic vocal mic on a Shure wireless handheld, in place of the transmitter...

The sE Electronics V7 Black is the all-black version of sE's V7 supercardioid dynamic vocal microphone, for live performance, rehearsal and spoken ...

The Neutrik NA3FF is a 3-pole female-to-female XLR gender changer: a compact, pre-wired coupler that joins two male XLR connectors. It is the quick...

The Neutrik NA3MM is a male-to-male 3-pole XLR gender changer that joins two female XLR connectors. Use it when two female cable ends need to meet,...

The Allen & Heath SQ5 (SQ-5) is a compact 48-channel, 96kHz digital mixer with 16 onboard mic preamps, built around Allen & Heath's XCVI FP...

The Allen & Heath AP11332 is Allen & Heath's own fitted dust cover for the SQ5 (SQ-5) digital mixer. Made from black, water-repellent 4oz p...

The BSS AR133 is an active DI box that runs on phantom power or an internal 9V PP3 battery. If the console's phantom power fails or is switched off...

The Neotech Wireless Performance Pouch (7901224) holds a wireless beltpack transmitter on a removable elastic band worn around the body, so the pac...

This 2m split jack cable has a 1/4" (6.35mm) stereo jack plug on one end and two 1/4" mono jack plugs on the other. It splits a stereo jack signal ...

The Pulse PLS000503 is a 5m Neutrik powerCON extension and interlink cable, with a blue NAC3FCA power-in connector at one end and a grey NAC3FCB po...

This is the standard grey version of the sE Electronics V7 MC1: sE's V7 supercardioid dynamic vocal capsule, built to fit Shure wireless handheld t...

The grey sE Electronics V7 MC2 is sE's standard finish of the V7 wireless capsule for Sennheiser handheld transmitters: a silver-grey grille over t...

The Roland SPD::ONE KICK (SPD-1K) is a compact digital percussion pad that puts real kick drum, stomp box and percussion sounds under your foot, ha...

The URSA Calf Strap holds a radio mic transmitter or IEM receiver pack on the lower leg, out of sight under costume, trousers or a skirt. URSA desi...