Cabling

Van Damme XLR cables made from Van Damme Tour Grade Classic XKE microphone cable with Neutrik XLRs: a female NC3FXX at one end and a male NC3MXX at...

Van Damme Tourcat Cat 5E ethercon cable: screened F/UTP flexible Cat 5E terminated with Neutrik etherCON connectors and screened RJ45s at both ends...

BNC to BNC RF cable made from RG58/U 50 ohm coaxial cable, in 0.5m, 1m and 5m lengths. It is for short runs and internal patching in wireless syste...

The Pulse stereo jack to 2 x mono jack sockets lead is a splitter with a 1/4" stereo jack plug at one end and two 1/4" mono jack sockets at the oth...

The Pulse 5-pin MIDI (DIN) cable has a 5-pin DIN plug at each end, for connecting the MIDI ports of keyboards, controllers, synthesisers, drum mach...

The Essager 100W USB-C to USB-C cable is a 3m braided lead for charging USB-C laptops, tablets and phones from a USB-C Power Delivery charger. The ...

The MXR DCP06 is a 6in (15cm) patch cable for linking effects pedals on a pedalboard. Both ends are flat, low-profile right-angle 1/4in jack plugs,...

The MXR DCISTR1RR is a 1ft (0.3m) TRS ribbon patch cable: a flat, ultra-thin stereo lead with a low-profile right-angle metal 1/4in TRS jack at eac...

The Rocoren braided 3.5mm aux cable is a 1m male to male stereo lead with a 3.5mm jack plug at each end. It connects phones, laptops, tablets and o...

The ANENG M469D is a two-part Ethernet cable tester for RJ45 network cables and RJ11 telephone leads. Plug one end of the cable into the master uni...

The Neutrik NA2MP joins a 3-pole male XLR and a mono 1/4-inch (6.35mm) jack plug in one pre-wired diecast body. Push the jack into a 1/4-inch outpu...

The Neutrik NA2FP is a pre-wired adaptor from a 3-pole female XLR to a mono 1/4-inch (6.35mm) jack plug. It lets a male XLR, such as the end of a m...

The Neutrik NAC3MM-1 is a powerCON cable coupler for extending powerCON mains cables. It houses a blue power-in receptacle and a grey power-out rec...

The Pro-Signal female XLR to phono adaptor converts a female XLR to phono (RCA). As pictured, it has a male XLR connector at one end, which takes t...

The Pro-Signal male XLR to phono adaptor converts a male XLR to phono (RCA). As pictured, it has a latching female XLR socket at one end, which tak...

The Pro-Signal 3.5mm headphone extension is a 1.5m 3.5mm jack extension cable with a 3.5mm stereo plug at one end and a 3.5mm stereo socket at the ...

The Ernie Ball Flex Instrument Cable is a straight-to-straight jack guitar cable in black, available here in 10ft (3.05m) and 20ft (6.10m) lengths....

This 2m split jack cable has a 1/4" (6.35mm) stereo jack plug on one end and two 1/4" mono jack plugs on the other. It splits a stereo jack signal ...

A USB 2.0 A plug to B plug cable in black, available in 1m and 0.5m lengths. It connects USB-B devices such as printers, scanners, external storage...

A 1m UK mains lead with a moulded UK mains plug fitted with a 3A fuse at one end and an IEC C7 "figure 8" connector at the other. It powers audio e...

The Neutrik NA3MM is a male-to-male 3-pole XLR gender changer that joins two female XLR connectors. Use it when two female cable ends need to meet,...

The Neutrik NA3FF is a 3-pole female-to-female XLR gender changer: a compact, pre-wired coupler that joins two male XLR connectors. It is the quick...

The Pro-Signal USB-C to HDMI cable is a 3m lead with a USB-C plug at one end and an HDMI A plug at the other. It connects laptops, smartphones and ...

The Pulse PLS00454 is a 1.5m Neutrik powerCON cable with a fused 13A UK mains plug at one end and a blue Neutrik powerCON NAC3FCA connector at the ...

The Pulse PLS000503 is a 5m Neutrik powerCON extension and interlink cable, with a blue NAC3FCA power-in connector at one end and a grey NAC3FCB po...

The Behringer POWERPLAY P2 is a wired personal in-ear monitor amplifier for drummers, keyboard players and anyone who stays in one spot on stage. F...

The Tenma 72-9966 universal cable tester gives quick, convenient continuity testing for the leads a touring or venue kit depends on: XLR, jack, Spe...

The Neutrik NP2RX is a right-angle 6.35mm (1/4-inch) mono jack plug for making up and repairing guitar leads, patch cables and amplifier cables whe...

The Neutrik NP2X is a straight 6.35mm (1/4-inch) mono jack plug for making up or re-terminating guitar and bass leads, patch cables, and connection...

The Pro-Signal PSG3198 is a 1m phono to phono pair: a slimline twin RCA lead with two phono plugs at each end, colour coded for left and right. It ...

The TGI Audio Essentials jack to jack instrument cable is a 3m (10ft) lead with 6.35mm (1/4-inch) jacks, for connecting guitars, basses, keyboards ...

Pro-Gaff® white gaffer tape, 24mm x 22.8m wide, is the roll to reach for when a mark needs to be read: case labels, cable-end IDs, channel strips a...

The Dirty Rigger LED Chest Rig is a lightweight, compact chest pack for crew who want a radio, pens, gloves and small tools on their front rather t...

The Dirty Rigger Compact Utility Pouch is a small belt tool pouch for the handful of things a stage tech, rigger or backline tech reaches for all d...

Duratool 60/40 leaded solder wire on a 100g reel: Sn60/Pb40 tin-lead alloy with a rosin flux core, 0.7mm in diameter (Duratool part no. D01681). It...

The Duratool 40W Soldering Iron with Rubber Lead is a 240V mains iron for general soldering: joining wires, repairing electronic components, and ci...

Pro-Gaff® black gaffer tape in the 24mm x 22.8m width is the narrow version of the matt cloth tape crews use for cable runs, stage and floor marks ...