VELCRO® Brand 25mm Self Adhesive Hook Tape 25 Metre Roll, Black

A bulk roll suits a production office, venue or workshop that gets through a lot of it: cable management, fixing labels, remotes and lightweight accessories to desks, racks and case lids, displays, and general organisation. Cut it to the length you need; Velcro recommends nipping or rounding the corners of each piece.

Where it sticks

• Velcro rates its PS14 rubber adhesive as recommended on anodised aluminium, stainless steel, glass, painted wallboard, plywood, polyester, polyacrylic and polished Formica, and as good on polyethylene, polypropylene, cardboard and fabrics
• Clean and dry the surface first and press the tape firmly into contact; Velcro's ideal conditions for applying it are 18°C to 20°C and 40% to 60% relative humidity
• Peel strength is rated after a 24-hour cure, so fix it the day before it has to take a load

Limits

• Not for vinyl or plastics with a high plasticiser content, and not recommended for use in water
• Rubber-based adhesive is for indoor use at room temperature, and the polyamide hook is not recommended for direct, prolonged exposure to UV light
• Not flame retardant: Velcro does not recommend Hook 088 where limited flame propagation is required
• Long exposure to water or humidity above 80% RH weakens the polyamide until it dries

Specifications

• Type: Hook (one half of a hook and loop fastener)
• Width: 25mm
• Length: 25m roll
• Colour: Black
• Construction: Woven polyamide with synthetic coating (Hook 088)
• Adhesive: PS14, rubber resin based
• Adhesive peel strength: 17 N/cm average after a 24-hour cure (FINAT FTM 1)
• Adhesive temperature range: −15°C to +90°C
• Hook-to-loop strength with Loop 001 (average): peel 2.0 N/cm, shear 10.3 N/cm²
• Cycle life: 10,000 cycles at 50% of minimum performance (EN 1414)
• Hook type: 088
• Part no.: E08802533011425
• Origin: Spain