Everbuild Stick2 Industrial Superglue GP, 20g (CYN20)

Sika's data sheet gives a set time of 10 to 15 seconds, and setting times by material of 5 to 60 seconds plastic to plastic, 2 to 20 seconds rubber to rubber and 10 to 60 seconds degreased metal to metal. It fills gaps of up to 0.1mm and will not bridge wider ones, so the parts must fit closely. Degrease both surfaces, apply to one surface only and hold for about 10 seconds. Keep the parts warm before bonding, because a chilled glue line sets slowly, and where possible work at 50% relative humidity or above. It is not for parts that will be permanently under water, or for bitumen or tar-leaching materials.

Safety

Warning: causes skin irritation (H315) and serious eye irritation (H319), and may cause respiratory irritation (H335). Cyanoacrylate: danger, bonds skin and eyes in seconds (EUH202). Keep out of the reach of children. Avoid breathing the vapour, use only outdoors or in a well-ventilated area, wear protective gloves and eye or face protection, and wash your skin thoroughly after handling. Read the safety data sheet before use.

Specifications

• Contents: 20g plastic bottle
• Type: single-component ethyl cyanoacrylate, solvent free
• Colour: transparent
• Set time: 10 to 15 seconds (Sika)
• Gap fill: up to 0.1mm; does not bridge gaps
• Suitable for: plastics, metals, PVCu and EPDM rubber
• Working temperature: −60°C to +80°C
• Shear strength: 15 to 20 N/mm² (steel to steel, ASTM D1002)
• Tensile strength: 28 to 32 N/mm² (steel to steel, ASTM D2095)
• Shelf life: 12 months from manufacture, stored at +5°C to +25°C
• Codes: Everbuild CYN20; Sika article 484651