VELCRO® Brand 25mm Self Adhesive Loop Tape 25 Metre Roll, Black

There is plenty on a 25m roll for cable management, mounting labels, remotes and lightweight accessories on desks, racks and case lids, displays, and keeping a production office or workshop organised. Cut pieces to length and, as Velcro recommends, nip or round off their corners.

Where it sticks

• Velcro rates its PS14 rubber adhesive as recommended on anodised aluminium, stainless steel, glass, painted wallboard, plywood, polyester, polyacrylic and polished Formica, and as good on polyethylene, polypropylene, cardboard and fabrics
• Clean and dry the surface first and press the tape firmly into contact; Velcro's ideal conditions for applying it are 18°C to 20°C and 40% to 60% relative humidity
• Peel strength is rated after a 24-hour cure, so fix it the day before it has to take a load

Limits

• Not for vinyl or plastics with a high plasticiser content, and not recommended for use in water
• Rubber-based adhesive is for indoor use at room temperature, and the polyamide loop is not recommended for direct, prolonged exposure to UV light
• Not flame retardant: Velcro does not recommend Loop 001 where limited flame propagation is required
• Long exposure to water or humidity above 80% RH weakens the polyamide until it dries

Specifications

• Type: Loop (one half of a hook and loop fastener)
• Width: 25mm
• Length: 25m roll
• Colour: Black
• Construction: Woven polyamide with synthetic coating (Loop 001)
• Adhesive: PS14, rubber resin based
• Adhesive peel strength: 17 N/cm average after a 24-hour cure (FINAT FTM 1)
• Adhesive temperature range: −15°C to +90°C
• Loop-to-hook strength with Hook 088 (average): peel 2.0 N/cm, shear 10.3 N/cm²
• Cycle life: 10,000 cycles at 50% of minimum performance (EN 1414)
• Loop type: 001
• Part no.: E00102533011425
• Origin: Spain